Panasonic PT 37P1 - Manual (Page 28)

Sound Menu
1 .Push the “Menu” Button.
2.Select the “Sound” Menu by pushing the
Position Up
“A”
or Down
“T”
Button and
Access the “Sound” Menu by pushing the
“ACTION” Button.
S.Selectthe required function by pushing the
Position Up
“A”
or Down “T”buttons, and
access and alter the setting by pushing the
Position Left “◄’’or Right‘>” buttons.
MENU
n
1,2 ^.-Access
fpi nn
Picture
Signal
Set up
Sound
Normal
ocso
CS O CB-Chsnge
ta
—
1 Sound Mode
|Bass
1 Treble
1 Balance [o]i=al
1 BBE sound l!
MENU
□ Exit
Note:
(1) You can change the level of each Function
(Bass, Treble, Balance, BBE sound) for each
Sound Menu.
(2) The same adjustment details are memorized
for all input terminals (AV(S'Video),
COMPONENT/RGB and PC).
Sound Mode Function
Normal Same sound as the input signal
Music Bass and Treble is set to optimum level
for music.
Speech Bass and Treble is set to optimum level
for speech.
Note:
(1) “BBE sound” adjusts the clarity of the sound.
An adjustment value of “0” is for normal sound.
(2) Adjustment values other than the “Balance”
value are memorized separately for each
Sound Mode (Normal/Music/Speech).
(3) The adjustment range values should be used
as an adjustment reference.
Item Effect Adjustment range
Bass 4 ►
Less Mors
k V5
Treble 4 ►
Less More
-15 F------^-^1-15
Balance ◄ ►
LettSP. %HSP.
■30 I------k -----^ 30
BBE
sound
◄ ►
Less More
°L-—A ^30
-f-Helpful Hint ([^Normalization)
If the N button on the remote control unit is pressed when the “Sound” menu is displayed, all adjustment values will
be returned to the factory setting level of each sound mode.
28