Signal menu, During “rgb” and “pc” input signal modes, Note – Panasonic PT 37P1 User Manual
Page 30: S]cb
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Signal Menu
During “RGB” and “PC” input signal modes
S]CB
Select
Signal
aa
o
Sync on G
□i
H-Freq.(kHz) [
31 I
V-Freq. (Hz) r
60 I
MENU
O
euit
Mode
Function
Sync on G
Set to “On” when the input signals from the sources connected to the COMPONENT/RGB {R,
G, B, HD and VD) input terminals and the PC input terminal are “Sync on G” signals.
H-Freq.(kHz)
Shows the horizontal scanning frequency for the-video signals which are currently being
displayed (display only).
V-Freq.(Hz)
Shows the vertical scanning frequency for the video signals which are currently being
displayed (display only).
Note:
(1) The “Sync on G” setting is applied to both the COMPONENT/RGB and PC input terminals.
30