Pt-42p1, Pt-37p1, Operating conditions – Panasonic PT 37P1 User Manual
Page 34: Applicable signals, Connection terminals, Specifications
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Specifications
I Power Source
120 V A C , 50/60 Hz
Power Consumption
PT-42P1
Normal use: 380 W {Maximum Current 3.3 A)
Stand-by condition: 1.7 W
Power off condition: 0.7 W
PT-37P1
Normal use: 350 W (Maximum Current 3.0 A)
Stand-by condition: 1.7 W
Power off condition: 0.7 W
Plasma Display panel
PT-42P1
PT-37P1
Drive method AC type
Drive method AC type
42-inch, 16:9 aspect ratio
37-inch, 16:9 aspect ratio
Screen size
PT-42P1
36.2" (W) X 20.4" (H) X 41.6" (diagonal)
(920 mm (W)
x
518 mm (H)
x
1056 mm (diagonal))
No. of pixels
408,960 (852 (W)
x
480 (H)) [2,556
x
480 dots]
PT-37P1
32.2" (W)
X
18.1" (H)
X
37" (diagonal)
(818 mm (W)
x
461 mm (H)
x
939 mm (diagonal))
No. of pixels
408,960 (852 (W)
x
480 (H)) [2,556
x
480 dots]
Operating conditions
Temperature: 0°- 40°C
Humidity: 20% - 80%
Applicable signals
Color System: NTSC, PAL, PAL-60, SECAM
Scanning format: 525i, 525p, 625i, 625p, 1080i (720p signals cannot be displayed.)
PC signals: VGA, S-VGA (compressed). Horizontal scanning frequency 15.6 - 50 kHz
Connection terminals
AV
COMPONENT/RGB
PC
SPEAKERS (8 Q)
SERIAL
TUNER
REMOTE
VIDEO IN (BNC)
S-VIDEO IN (Mini DIN 4-pin)
AUDIO IN L-R (RCA pin jack
x
2)
VIDEO OUT (BNC)
Y/G
P
b
/B
P
r
/R
HD
VD
AUDIO IN L-R (RCA pin jack
x
2)
VIDEO (High-density D-sub 15-pin)
AUDIO
0.5 Vrms (1/8"{3 mm) mini jack)
ForTY-SP42P1U only. (For PT-42P1)
ForTY-SP37P1U only. (For PT-37P1)
External control terminal
1.0 Vp-p (75 a )
(with 75 i2 or high-impedance auto select)
Y: 1 Vp-p (75 0),C: 0.286 Vp-p (75 Q)
0.5 Vrms
1.0 Vp-p (75 O) (bridge output)
1.0 Vp-p (including synchronization)
± 0.35 Vp-p
± 0.35 Vp-p
± 1 . 0 - 5.0 Vp-p
± 1.0 - 5.0 Vp-p
0.5 Vrms
34