Aspect-auto button (panasonic auto), Note, Aspect controls – Panasonic PT 37P1 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASPECT Controls
_y
The Wide Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen “cinema
format" picture.
1
ASPECT-AUTO
ASPECT-AUTO Button (Panasonic Auto)
Press the ASPECT-AUTO button to switch to
Panasonic Auto mode. The display will
automatically become enlarged.
iPan^sonic Autok
Ç)
For an elongated image
Image is expanded
Changes in accordance with the
N. Panasonic Auto mode setting.
{Refer to page 31.)
Note:
^
(1) If a 525p or 1080i signal is input during Component input
signal mode and during RGB and PC input signal mode the
controls will not operate.
2
MANUAL-ASPECT
ASPECT-MANUAL button
The aspect mode changes each time the
ASPECT-MANUAL button is pressed.
r> 4:3 —> Zoomi —> Zoom2 —
----- Just <--------- 16:9 <------------
Note:
(1) During RGB and PC input signal mode, the mode switches
between “4:3” and “16:9” only.
(2) For a 525p (480p) signal input during “Component” input
signal mode, the mode switches between “Zoomi” and
“16:9” only.
(3) When a 1080i signal is being received, the mode is set to
“16:9” mode, and switching is not possible.
(4) The aspect mode is memorised separately for different
input signal formats (NTSC/PAUSECAM, 525p, RGB and
PC). (525p includes 525i and 625i signals.)
20