N power and sound h controls, Power and sound controls, Power – Panasonic cq-dpg55len User Manual
Page 14: Volume, Attenuator, R1í b15g, S*hdb (super high definition bass)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
n Power and Sound
H Controls
Power
If the car is not already running, turn the key in the ignition until the
accessory indicator lights.
Press PWR to switch on the power.
Press and hold PWR again to switch off the power.
Note:
When power is switched on for the first time, demonstration display
appears. To release this display, press DISP.
R1Í B15G "
Volume
Press “VOLA” or “ VVOL” to increase or decrease volume.
lu
•Volume Level
Oto 40
Press “VOLA” or “VVOL” for more than a half second to sequential
ly change numeric levels on the display.
S*HDB (Super High Definition Bass)
Especially for rock music, the bass-sound will be more powerful.
• Press and hold ATT for more than 2 seconds to be able to listen to
high-definition bass.
• Press and hold ATT for more than 2 seconds again to cancel.
Attenuator
• Press ATT to decrease volume to about 1/10 of the previous level.
rm.
• Press ATT again to cancel.
Note:
This unit is equipped with anti-volume-blast circuit which serves as an automatic volume level
adjuster so that you will not be deafened with sudden loud volume.
This system operates as below. When PWR is first pressed to switch on, the volume level is low. After
that, the volume level gradually returns to the level when the switch is turned off.
Anti-volume-blast circuit is not effective when volume level is lower than position 20 at the display.
14
CQ-DPG55LEN