Installation, Using the rubber cushion (optional), Continued installation procedures – Panasonic cq-dpg55len User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation
continued
installation Procedures
1. Secure the Mounting Collar ©.
Insert Mounting Collar 0 into the car's dashboard, and bend mounting tabs out with a screwdriver.
c) Insert the unit into Mounting Collar
0
and push it in until “click” Is heard.
d) Secure the rear of the unit to the car by either of the two recommended methods.
■ Using the Rear Support Strap ©
Affix one end of the Rear Support Strap ® to the rear of the unit, and the other end to the Fire Wail
of Car, or some other metallic area.
■ Using the Rubber Cushion (Optional)
(If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt (D on the rear of the unit with Rubber Cushion (Optional), and mount it into the
existing Rear Support Bracket.
(2) Plain Washer
38
Rre Wall of Car
(P Hex. Bolt
Spring Washer
*\(D Plain Washer
© d) Rear Support Strap
C|)
Mounting Bolt
Mounting Collar
Rear Support Bracket
(existing on the car)
CQ-DPG55LEN