Remote control basics, 1, remove the battery holder, Replace the battery – Panasonic cq-dpg55len User Manual

Page 30: Insert the battery holder, Caution, Battery replacement, Names of main controls, Panasonic

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Remote Control Basics

Battery Replacement: -

1, Remove the battery holder.

Pull the holder by the Position B while pushing

Position A in the direction indicated by the
arrow.

2. Replace the battery.

Set a new battery properly with (+)side up

as illustrated.

3. Insert the battery holder.

Push in the holder to the original position.

Note on Batteries:----------------------

Old batteries must immediately be removed and disposed.

Battery Information:

• Designated Battery: Panasonic Lithium Battery (CR2025)
• Battery Life: 6 months with normal use (in normal room temperature)

Back side

Caution;

Improper use of batteries may cause overheating, explosion or ignition, resulting in injury or fire.
Battery leakage may cause damage to the unit.

• Do not disassemble or short the batteries. Do not throw the batteries into the fire.

• To avoid the risk of accident, keep the batteries out of reach of children.

Names of Main Controls:

Power Button

i Select Button

Mode Button

® ATT Button

O S - HDB Button

O SDM Button

@ SCAN Button

AF/REG (RDS) Button

O PTY (RDS) Button

® Volume Control Button

® REPEAT Button

0 TUNE/TRACK Up/Down Button

Panasonic

: Sar-AudTp. .

30

CQ-DPG55LEN

^ MONO/LOCAL Button

BAND /DISC UP Button

Advertising