Panasonic cq-dpg55len - Manual (Page 22)

RDS (Radio Data System) Reception
continued
jfpressan^oid
TP Seek Tuning
Press “VTUNE” or 'TUNE A” for more than a half second, then
release. The radio automatically stops on the next available TP sta-
tion.
Auto TP Station Preset
Press and hold BAND (AUTO • P) for more than 2 seconds until the display
blinks in TA on. The six strongest available TP stations are automatically set
in memory on the preset button 1 through 6.
Once set, the preset stations are sequentially scanned for 5 seconds each.
Tuning in a TP station preset
Press any of the preset buttons 1 through 6 that you want to hear. And then
Best Station Research function is activated to automatically select the
strongest available frequency for the TP station (through the built-in frequen­
cy) lists, if reception is weak.
33C XENT'i^
Muting TA on
Press and hold TA for more than 2 seconds to light TA on”.
Then Traffic Announcement (TA) function is activated to operate,
allowing you to listen to only Traffic Program whenever it is available.
Muting TA on canceling (Muting TA on TA on)
Press TA again.
Press “VOLA” to increase the volume level.
TP Auto Search
If receiving conditions are poor when TA is on during muting and if
there is no other alternative frequency in the same network, a traffic
announcement station in good receiving condition is automatically
searched for.
CD/CD-C TA on
Press TA during CD, CD changer mode.
TA on mode is selected, while listening to the source in that mode,
wait for Traffic Announcement to being.
(CD)
01 0 "dc‘
Information
End
Switching to TA off Mode
Select either one of the following steps.
• Press TA when TA is ON.
• Press and hold TA for more than 2 seconds when Muting TA is ON.
• Press TA when CD/CD-C TA is ON.
22
CQ-DPG55LEN