Panasonic KX-P3123 User Manual
Page 108
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Letter Quality (LQ):
LQ is one of three print qualities available on this printer. LQ mode increases
the number of dots per character to improve the print quality but decreases
the printing speed.
LF (Line Feed):
"LF” is a control code that advances the paper one line.
Line
Spacing:
The space between lines of type. Also called leading.
LSB:
“LSB” is an acronym for “Least Significant Bit”, and means the rightmost
position in a binary number.
MACRO memory function:
This feature allows the printer to easily save and recall a particular
combination of functions, even if the power is turned off.
Margin:
The area between the edge of the paper and the first or last print position;
left, right, top or bottom margin.
Menu:
Menu is a list of topics from which you can enter to select the desired
conditions or settings.
Micro Line Feed:
Micro Line Feed function allows you to feed the paper by one micro line
{1/180"). (i^ P.37)
MSB:
“MSB” is an acronym for “Most Significant Bit”, and means the leftmost
position in a binary number.
Multipoint mode:
The mode in which the printing of scalable fonts is possible.
OFF LINE:
OFF LINE is the condition in which the printer cannot communicate with the
computer.
ON LINE:
ON LINE is the condition in which the printer can communicate with the
computer.
Overline printing:
Overline printing produces a continuous line above the characters, using
the first pin of the printhead.
Parallel interface:
An interface that transfers data one byte at a time.
Parity:
Parity is a method for a computer and printer to check the accuracy of data
transfer.
Perforation:
Perforation indicates the tear position on the fanfold paper. (US’ P. 37)
108