Panasonic KX-P3123 - Manual (Page 86)

Command Reference Program
Screen 3
8 Press (Enter).
The screen will show the
detailed explanation of the
command.
If you want to exit the
Command Reference
Program, go to step 9.
If you want to print out this
explanation, press [Enter]
again and press [ y ) .
The explanation will
be printed.
The display will return
to screen 3.
« Panasonic KX-P3123 command reference utility (xxxxxxxxxxx) »
riEPSON]"!
ESC+’x’+n Selects print quality
j
<PRINT QUALITY>
Selects print quality
Name: ESC X n
Dec.: 27 120 n
Hex.: 1B 78 n
Comment:
*The following values of n can be used:
n=0: Draft font
n=1: LQ font
n=2: SLQ mode (Roman 5,10, 6 and 12 CPI fonts only)
- - E N D - -
[ T ] / [ i ] : Text scroll-down/up
[Pg Up] / IPg.Down]: Go to previous/next command
[Esc] : SELECT COMMAND mode
[Enter] : Print current command description
Screen 4
« Panasonic KX-P3123 command reference utility (xxxxxxxxxxx) »
riEFSON]"!
[ESC+’x’+n 'Selects print quality
<PRINTQUALITY>
Selects print quality
Name: ESC x n
Dec.: 27 120 n
Hex.: IB 78 n
Comment:
*The following values of n can be used:
n=0: Draft font
n=1: LQfont
n=2: SLQ mode (Roman 5 , 1 0 , 6 and 12 CPI fonts only)
- - E N D - -
Print current command description ? (Y / N)
YES NO
Press CID-
You have exited the
Command Reference
Program.
[ T ] / [ i l Scrolls the text one line down/up
[Pg.Up]/
[Pg.Down]
Displays the explanation of previous/next
command
[Esc] Returns to screen 2
[Enter] Prints the detailed explanation of the
command
[E] Exits to DOS
Note:
• You can proceed through the Command Reference Program using a computer mouse or your
keyboard. Highlight the desired item and click the left mouse button, or follow the directions on
your screen for keyboard operation.
86