Panasonic KX-P3123 - Manual (Page 56)

Using the Control Panel
Protocol Select
ON .....................X/ON-X/OFF Protocol
OFF* * ............... DTR Protocol
@
Remaining Buffer Capacity to Suspend
Data Transfer (S.D.T.) (X/OFF)
ON* ................... 128 byte
OFF ................... 512 byte
Remaining Buffer Capacity to Resume
Data Transfer (R.D.T.) (X/ON)
— When the S.D.T. is set to ON
ON* ................... 256 byte
OFF ................... 384 byte
— When the S.D.T. is set to OFF
ON* ................... 640 byte
OFF ................... 768 byte
Designation of Signal Polarity for DTR
Protocol Mode
NO................... . When the signal is
“space”, the printer tells
the computer that it can-
@
not accept transferring
data.
OFF* ............... . When the signal is
“mark", the printer tells
the computer that it can­
not accept transferring
data.
Note:
• Items ® ~
L
will only appear when the
optional KX-PS14 serial interface board is
installed.
* denotes setting when shipped from factory.
CO
<D
The control table is replaced with the following table.
Column indicator
Row indicator
Cl C2 C3 C4 C5
CD CD CD CD CD 1—1
R1 C=1
R2
czt
R3 dJ
R4
CD
SUPER
QUIET
/----------- \
TEAR
OFF
/ ' >
LOAD
PARK
f ' >
ON LINE
(------------\
FF
f ---------- \
LF
^
___________> L--------- j V______ / V______ 4
Note:
• The rightmost column indicator is ignored.
• Each indicator is controled by using the keys below.
56