Paper feed selection, Push tractor mode, Rear feeding) – Panasonic KX-P3123 User Manual
Page 20: Pull tractor mode '* [t| ” (bottom feeding), Friction mode “ q, Note
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Paper Feed Selection
This printer has two paper feed mechanisms to support 3 paper paths. One mechanism is TRACTOR
mode for continuously fed paper. In the tractor mode you can choose between PUSH or PULL.
The other paper feed mechanism is FRICTION mode. In the friction mode you can feed single sheets
or envelopes through the top. The optional KX-PT10 Cut Sheet Feeder will accommodate automatic
feeding of single sheets, from the top paper path.
Push Tractor Mode
t i
[« ’I
(Rear Feeding)
— fanfold paper (1 part)
— multipart forms consisting of 2 parts
Pull Tractor Mode '* [T| ” (Bottom Feeding)
— multipart forms consisting of 3 or 4
parts
— labels
— fanfold paper (1 part)
Friction Mode “ Q
— single sheets
(The KX-PT10 allows you to automatically
feed up to 80 sheets of 20 lb paper.)
— envelopes
Note:
• When feeding paper from the bottom, do not use reverse line feed. Paper may not feed
correctly and print quality may not be optimum.
• Paper Parking is not available when the paper is installed from the bottom.
• Multipart forms consisting of 2 parts may be used for rear feeding (Push mode). For 3 or
4 part forms, we recommend bottom feeding (Pull mode) for optimum print quality.
20