Recalling factory settings (default settings), Be sure the power is on, Press i function ] to enter the function mode – Panasonic KX-P3123 User Manual
Page 51: Press ( load/park factory mode, Press ( load/park factory mode. (set) to set the
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Control Table
Recalling FACTORY Settings (Default Settings)
All of the original settings in the Function mode can be restored in the printer as they were originally
set when the printer was shipped. You can recall the factory settings anytime. {You cannot change
the factory settings. The MACROS settings are not canceled by recalling the factory settings.)
1
2
Be sure the power is on.
.
1
---------------------------------------
1
A M I C R O L F T ^
^LJ^RJM C nO N
^3 SU PE R Q U ET
_ PO W ER
ON LINE
FF
LF
FU NC TK)
n
|
— PA PER O O T
PITCH FOFW LENGTH
e x it
W ^
Press i FUNCTION ] to enter the FUNCTION
mode.
The ON LINE/FUNCTION indicator will blink.
Press and release [ TEAR OFF ) (OTHERS)
until the column indicator is blinking over
FACTORY.
<
MARGIN ►
ON LINE
FUNCTION
SUPER QUIET
POWER
PAPER OUT
Press ( LOAD/PARK
FACTORY mode.
(SET) to set the
You will hear a beep. The column indicator over
FACTORY will be lit.
51