Registering the station unit using the pin, 2 station unit, Base unit/station unit – Panasonic KX TGA420B User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Registering the Station Unit Using the PIN

If the PIN (Personal Identification Nunnber) has been stored with the base
unit to prevent unauthorized persons from registering and using an

extension unit (station unit/cordless handset) (see page 52 in the

KX-TG4000B/KX-TG2000B Operating Instructions), you are required to
enter it at registration,
Only one unit can be registered at a time by using the base unit.

Make sure that the base unit and station unit are in the standby mode.
Registration must be compieted within 1 minute.

J

Base unit:

Follow steps 1 to 4 on page 12.

2 Station unit:

Repeat the steps 5 to 7 on page 12.

3 Enter the PIN.

If you enter the wrong PIN, press [CLEAR),

and enter the PIN again.

4 Press (ENTER].

Base unit/station unit:

Wait until a beep sounds on the base unit

and station unit and until both of the
displays show the assigned extension

number.
Ex. Extension number is 2.

• To return to the standby mode, press

(Hii).

• The extension number will be displayed on

the station unit.

Handset

registering

HS registration

Enter PIN:D---

ENTER=Set

HS registration
Enter PIN;123D

ENTER=Set

Station unit

Handset2

registered

Base Unit

If registered to KX-TG2000B, the

[LINE

3| and

[LINE 4|

buttons on the station

unit will be inoperative.

For assistance, please call: 1-800-211-PANA(7262)

13

Advertising