Panasonic KX TGA420B - Manual (Page 68)

Before Requesting Help
Problem Remedy
You cannot program | *Do not pause for over 60 seconds while
function items, such as the | programming,
line selection. | »Programming is not possible while the
handset is off the cradle or the DIGITAL
SP-PHONE indicator lights.
• Make sure that the station unit is in the
1 standby mode.
You cannot make a call
even if there is at least one
free line.
• You may not be able to make a call, if 4
other units are in use (for users registered
to KX-TG4000B), or if more than one unit is
in use (for users registered to
KX-TG2000B). Try again later.
You cannot page another
unit.
• You may not be able to page, if 4 other
units are in use (for users registered to
KX-TG4000B), or if more than one unit is in
use (for users registered to KX-TG2000B).
Try again later.
• The unit is too far from the base unit.
• The paged unit is in use.
You cannot store a name
and phone number in the
directory.
■
• You cannot store an Item in the directory
while the handset is off the cradle or the
DIGITAL SP-PHONE indicator lights.
• Do not pause for over 60 seconds while
programming.
While programming or
searching, the unit starts to
ring and stops the
program/search.
• To answer the call, lift the handset off the
cradle, oress 1
digital
SP-PH0NE1 or press
the called line button. Start again from the
beginning after hanging up.
The caller’s information is
not displayed.
'
• The unit is removed from the ring group of
the line by the base unit.
• Other telephone equipment may be
interfering with your phone. Disconnect it
and try again.
• Other electrical appliances connected to
the same outlet may be interfering with the
Caller ID information.
• Telephone line noise may be affecting the
Caller ID information.
68