Panasonic KX TGA420B - Manual (Page 59)

Battery Replacement
If
“Recharge” IS
displayed with the battery icon “CE” flashing, please
recharge the battery for another 8 hours If
“Recharge”
still shows after
being fully charged (p 10), or if
“install battery”
is displayed when
the battery has been installed or in use for certain amount of time {p 64),
replace the battery with a new Panasonic HHR-15F2G1 battery To order,
call the accessories telephone number on page 2
J
Remove the battery cover
Press down the arrow (©),
then slide the cover in the
direction shown {(D)
2 Replace the battery
Be sure wires are free from
being pressed by the battery
body or battery cover
3 Close the battery cover Slide the battery cover, and push it forward as
shown until
It
locks into place
4 Connect the AC adaptor to charge (p 9) To use in a remote location
(battery power mode), make sure you charge the new battery for about
8 hours in order to display the battery strength prompt correctly (p 10)
A nickel metal hydride battery that is recyclable powers the
product you have purchased
Please call 1-800-8-BATTERY for information on how to
recycle this battery
(D
For assistance, please call 1-800-211-PANA(7262)