Panasonic 2-LINE PLAIN PAPER FAX KX-FPW111 - Manual (Page 28)

If a busy tone is heard, the telephone number
dialed is applied to LINE 1.
If the unit rings and the LINE 2 indicator
flashes red, the telephone number dialed is
applied to LINE 2.
Replace the handset.
Checking the telephone number applied to each line
When the unit is connected to 2-line telephone jack or two single line telephone jacks, follow these steps to
check the telephone number for each line.
1
2
3
4
Setup ___________
Press [LINE 11.
•The line indicator lights green.
Lift the handset.
Dial one of the telephone numbers.
Note;
•There is a difference on their features between line 1
and line 2 (see “Different line features” on page 16).
If the dialed telephone number is not applied to the
desired line, change the setting of the line as shown
below.
To switch telephone numbers
between line 1 and line 2
■ When the unit is connected to 2-line telephone
jack (RJ14C) as shown on page 25:
Change the setting of the LINE CHANGE feature
(p. 37).
■ When the unit is connected to two single line
telephone jacks (RJ11C) as shown on page 26:
Change the connections of two telephone lines each
other at the wall jacks.
Explanation of line indicators
Line indicator Line condition
Off The line is free.
Flashing quickly
(Red) An incoming call is being
received.
On (Green) The line is selected.
On (Red) When the facsimile is in use
or when an extension
telephone/externa!
telephone answering
machine is in use.
Flashing (Green) The call is on hold.
28