Panasonic SC-CH33 - Manual (Page 16)

Basic Operating Procedure
i (Also available from the remote control. Follow the procedure
described below.)
1
Press POWER STANDBY
6
/ON to switch on
the power.
2
Select the sound source by pressing TAPE,
CD or TUNER.
The display of the selected mode will appear. If you press a
different sound source while listening to a compact disc or
tape, the disc or tape automatically stops playing.
eWhen selecting the tape mode from the remote control,
press on TAPE instead.
The deck will automatically start playing.
3
start the sound source.
4 Adjust the volume level.
The memory backup function will retain the volume level and
sound source.
Note;
Before you set the system to the standby mode, be sure to reduce
the volume level to prevent the extremely high output from the
amplifier from damaging the speakers.
How to mute the volume
Press the muting button on the remote control.
MUTING
-20dB □
The muting indicator appears on the display.
•This lowers the volume level by 20 dB (approximately Vio).
•Cancel the muted state by pressing the muting button once again
or reduce the volume level to the minimum position and then reset
to the desired volume.
How to use headphones
(not included)
Reduce the volume level.
Connect the headphones to the headphones jack.
•When you connect the headphones, the speakers will automati­
cally cut off.
•Avoid listening for prolonged periods of time to prevent hearing
damage.
•Plug type: Stereo mini