Ilistening to tapes, To play back prerecorded cassettes, Press the tape input select button – Panasonic SC-CH33 User Manual

Page 31: Press reverse mode, Press one of the piay buttons to start playback, Listening to tapes

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

iListening to Tapes

Ip You can use either deck 1 or deck 2 for tape playback by following

the same steps.

To play back prerecorded cassettes

1

2

Press the TAPE input select button.

Press EJECT, and then insert the cassette you

wish to play.

• Insert the cassette with the exposed tape facing down.
•You can use normal, chrome and metal tapes for playback.

This deck automatically identifies the kind of tape loaded,

and sets the equalization accordingly. (Auto tape selector
function)

•To reset the tape counter to 000, first press the DECK 1/2 to

select the deck you are going to use and press the counter
reset button.
When the system reverses to play the reverse side of the
tape, the counter will count backward (000, 999, 998...).

Press REVERSE MODE.

Each time you press, the display will show one of three re­

verse mode indicators.

^ : The player plays one side only, and then the tape

automatically stops.

The player plays both sides, and then the tape

automatically stops.
If you start playback in the reverse mode, the player
plays back only one side.

: When you load a cassette into only one of the

two decks;
The player plays both sides of the tape repeatedly
until you press the stop button.
When you load cassettes into both decks;
The player plays both sides (forward and reverse)
of the tape In deck 1, and then both sides of the tape

in deck 2. Playback will continue until you press the
stop button. (See page 33.)

Press DOLBY NR if the cassette you want to
play was recorded with Dolby noise re­
duction.

•The Dolby NR Indicator lights.
• If the tape was not recorded in a Dolby NR mode, press

DOLBY NR again. The Dolby NR indicator will go out.

Press one of the piay buttons to start play­
back.

(Also available from the remote control.)

> : The fonward side (front side) will play.
< : The reverse side will play.

The display indicates which tape is playing.

T n

n

г

t

i

l

l

c

n

П

1

и

и

1

1 DECK 1 1

1

MAX'

..... " =

IDOLBY NRI

VOLUME

•When you load cassettes in both decks, press DECK 1/2 to select

the deck you want to use.

•You can reverse the direction of play manually during playback by

pressing the opposite playback button.

31

Advertising