To cancel program edit*recorcling, Press the cd stop button twice, To confirm the play sequence – Panasonic SC-CH33 User Manual
Page 43: To record another disc on the remaining blank tape
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ To cancel program edit*recorcling
(Also available from the remote control.)
Press the CD stop button twice.
The CLEAR display will appear.
■ To confirm the play sequence
(Also available from the remote control.)
You can confirm the play sequence on the display
by pressing the skip/search button in the stop
mode.
o o
To record another disc on the
remaining blank tape ________________
When recording of the first disc has finished, you can record the
tracks of another disc.
After recording and while the cassette deck is in the recording
standby mode;
1) Check the time remaining on tape side В on the display.
2) Press OPEN/CLOSE on the CD player to open the disc tray, and
then replace the disc with the second disc.
To close the tray, press this button again.
3) Turn the jog dial to select the track you want to record.
4) Press SET.
5) Repeat steps 3) and 4) for each track you wish to program until
the whole play time meets the time remaining on tape side B.
6) Press the CD play button.
The synchro start function starts recording.
43