Panasonic SC-CH33 - Manual (Page 38)

Edit-Recording from Compact Discs
You can edit-record up to 36 tracks.
Using the edit-recording safeguards against a break in the continu­
ity of the sound when the recording changes from one side of the
tape to the other.
Before recording, the cassette deck will automatically rewind the
tape to the beginning and make a non-recorded passage about
10 seconds, then stop.
So you don't have to set the cassette tape to the starting position
before recording.
Sequential CD recording (ALBUM)
The system calculates and displays in advance the length of the
tape required to accommodate the recording of all the tracks on the
compact disc in their original sequence. The tracks are then re­
corded in their original sequence.
Switch on the power.
1
Press the CD input select button.
2
Press OPEN/CLOSE on the CD piayer to ioad
a disc.
In this editing mode, you can use compact discs with up to
36 tracks.
3
Press CD EDIT.
4
Turn
the jog dial to select
ALBUM.
The ALBUM, PROGRAM, and FIT displays will appear in
sequence.
5
Press SET.
The length of the tape required to record all the tracks appears
on the display.
Album edit-recording display
0 r „
1 1 L
r n
_/ _/
MAX"
\ EDIT 1 1
□ [D [H B [S [S [7] [8] [E ® dl] [ill ^
MIN <^5
VOLUME
I — Edit indicator
tn this case, you would need a C-59 or longer tape.
If the compact disc has 37 or more trad<s, ERROR appears
first and then the system will automatically establish the pro­
gram edit-recording mode (See page 42). Program up to
36 tracks in the program edit-recording mode, and proceed
with the recording.
Load a cassette In deck 2.
• Since, in this case, you need a tape that is at least
59 minutes long, insert a C-60 tape.
Check that the tape's erasure prevention tabs are intact.
Then insert the cassette into deck 2.
•When making a Dolby NR recording, press DOLBY NR.
Turn the jog dial to specify the length of the
tape you are using.
0
1 f
I EDIT I
r r n
u u I DECK 2 I “AX-