Panasonic SC-CH33 - Manual (Page 42)

Edit-Recording from Compact Discs
(continued)
Program edit-recording
You can specify the tracks to be recorded in the desired sequence
while checking on the display how much time is left over.
2*4'6 P>
mill
rrr
ÚSE
CANCEL
- Q ^ - r-> [ -° I I o
O 0 6-^
§
3*5*7
■m
9
o o*
1
Follow tape length priority recording steps 1
through 4 (page 40).
2
Turn the jog dial to select PROGRAM.
The ALBUM, PROGRAM, and FIT displays will appear in
sequence.
3
Press SET.
4
Turn the Jog dial to select the length of the
tape you are using.
You can specify the length by the minute.
Program edit mode display
5
Press SET.
The time remaining on both sides of the tape will appear on the
display.
~l r i ’ n n ~ j n - n n
I DECK 2 I MAX-
„/ u - u u _/ /_/- u u
I EDIT I PRnnRAU
M)N .ME
VOLUME
b Turn the Jog dial to assign the tracks in se­
quence.
You can also assign the tracks using the button on the numeric
button on the remote control.
(See "Program play” on page 25 for detailed insfructions.)
7
Press SET.
8 Repeat steps 6 and 7 to complete the pro­
gram.
If there is no more time left on tape side A, the system will
select tape side B automatically.
9
Press the CD play button to start recording.
The recording will start after the following steps.
1. The cassette deck starts to rewind the tape to the begin­
ning.
2. The cassette deck forwards the tape making a non-re-
corded passage of about 10 seconds and stops to enter the
recording standby mode.
3. The compact disc player automatically scans for the peak
(highest) level of the entire disc (ATLS; see page 39.) and
then recording will start.
When edit-recording has finished, the deck automatically en­
ters the recording standby mode.
If you want to change something you have set, or if an error has
occurred, press the cancel button,
The system will return to the previous setting mode.