9 press the cd play button for automatic recording, Press the cd stop button twice, To confirm the play sequence – Panasonic SC-CH33 User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
9
Press the CD play button for automatic re
cording.
The recording will start after the following steps.
1. The cassette deck starts to rewind the tape to the begin
ning.
2. The cassette deck forwards the tape making a non-record-
ed passage of about 10 seconds and stops to enter the
recording standby mode.
3. The compact disc player automatically scans for the peak
(highest) level of the entire disc (ATLS; see page 39.) and
then recording will start.
When edit-recording has finished, the cassette deck automati
cally enters the recording standby mode.
If you want to change something you have set, or if an error has
occurred, press the cancel button.
The system will return to the previous setting mode.
Note;
When it is not possible to record all the tracks even by rearranging
the track sequence, the OVER display will appear.
■ To cancel tape length priority recording
(fit edit-record I ng)
(Also available from the remote control.)
Press the CD stop button twice.
The CLEAR display will appear.
■ To confirm the play sequence
(Also available from the remote control.)
You can confirm the play sequence on the display
by pressing the skip/search button In the stop
mode.
o o
41