Ar/as coating on the screen, Dear panasonic customer – Panasonic TX-47WG25 User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Dear Panasonic Customer
Welcome to the Panasonic family of Customers. We hope that you will
have many years of enjoyment from your new Wide Video Projection System.
To obtain maximum benefit from your set, please read these Instructions
before making any adjustments, and retain them for future reference.
Retain your purchase receipt also, and note down the Model Number and
Serial Number of your set in the space provided on the rear cover of these
Instructions.
—
AR/AS Coating on the Screen ---------------------------------------------------
The Screen is coated with a special material to hinder ambient light
reflection and dust adherence. It aids picture performance during high
ambient light conditions. The AR/AS coating may be observed when
the set is switched off, since the coating give the screen surface a faint
purplish or blue hue. Take care not to mark or scratch this coating.
{TX-47WG25X are not equipped.)
Note:
(1) The long time (max. 2 hours) use of TV game on the set is not recommended since the
signal from TV game may be the cause of damage on picture projection tubes on the set.
(2) Do not allow any still picture or parts of picture that do not move on the screen for an ex
tended length of time. These pictures can adversely affect your picture projection tubes.
Some examples of still images are Television programming logos, Video games, Computers
and Text programmes, etc. If still picture cannot be avoided, reduce the brightness and
contrast levels of the picture to minimize any damage that might occur.