Panasonic TX-47WG25 - Manual (Page 8)

Convergence Adjustment
Open
Prior to Adjustment, tuning the broadcast signal or input a
Video signal and operate the set for more than 60 minutes.
If the set location or direction is changed or moved, the set may
be affected by terrestrial magnetic fields, causing the colours
displayed to be out of alignment.
If this occurs, adjust the each ASPECT mode as indicated
below.
If it is needed, carry out the following procedure 1 through 9
and following have to be carried out once with PAL signal and
with NTSC signal.
1 MMNMENU
2 [S
3 [s
H]
%
Push the “MAIN MENU” and “Position”
Buttons, until the Features Menu to
“CONVERGENCE”.
CONVERGENCE
green
V ^
NEXT M
Use the Position Up, Down buttons of the
remote control to align the Horizontal Green
line and Vertical centre marker.
CONVERGENCE
<\ gfieen
NEXT :[H]
Vertical centre
marker
Use the Position Right, Left buttons of the
remote control to align the vertical Green line
and Horizontal centre marker.
CONVERGENCE
A green
NEXT:®
Horizontal centre
marker
Push the “N” button of the remote control to
set the Red Adjustment mode, (store Green)
8