Panasonic TX-47WG25 - Manual (Page 23)

Tuning Procedure
3 4
Use the Programme Number
Up
“ a ”
button to sequentially
check each station.
If necessary, repeat step 3 to 4
for each Programme Number.
PRE
MAIN MENU
After all stations are tuned,
push the “PRE.” (PRESET)
Button 4 times.
After all stations are tuned,
push the “MAIN MENU” Button
twice.
This returns the set to the
normal viewing condition.
Programme Number memory
locations.
Helpful Hint
(1) If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the
“Colour System Selection” operation on page 33.
(2) After the Automatic Tune is finished, push the Programme Number “Up” Button to confirm the tuning condition for
each Programme Number. If some Programme Numbers are unused, it is possible to skip such Programme
Numbers. Please refer to the Programme Number Skip operation on page 28.
(3) Repeated pushing of the “PRE.” (PRESET) button changes the Preset Menu as follows;
r^CH SELECT^SYS SELECT-^ AUTO TUNE ^ MANUAL TUNE->SOUND SYS n
{Page 18) (Page 20) (Page 22) (Page 24) (Page 32)
TV Modef- SKIP^
(Normal viewing condition) (Page 28)
FINE TUNE ^COLOUR SYS^
(Page 26} (Page 33)
23