360 Systems MAXX-1000SD - Manual (Page 114)

Page 114 MAXX Owner’s Manual
Regulatory Certifications
Safety
The Image Server was tested by Underwriters Laboratories and found to comply with the
following safety standards:
EN 60950, 3rd Edition, dated December 1, 2000, Standard for Safety of Information
Technology Equipment, Including Electrical Business Equipment.
Laser Compliance
The CD-ROM device used in this product is a Class 1 certified laser product. Operating this
product outside specifications or altering its original design may result in hazardous radiation
exposure, and may be considered an act of modifying or new manufacturing of a laser
product under U.S. regulations contained in 21 CFR Chapter 1, subchapter J or CENELEC
regulations in HD 482 S1. People performing such an act are required by law to re-certify
and re-identify this product in accordance with provisions of 21 CFR subchapter J or
distribution within the USA, and in accordance with CENELEC HD 482 S1 for distribution
within countries using the IEC 825 standard.
Laser Safety
Laser safety in the United States is regulated by the Center for Devices and Radiological
Health (CDRH). The laser safety regulations are published in the “Laser Product
Performance Standard,” Code of Federal Regulation (CFR), Title 21, Subchapter J.
The International Electrotechnical Commission (IEC) Standard 825, “Radiation of Laser
Products, Equipment Classification, Requirements and User’s Guide,” governs laser products
outside the United States. Europe and member nations of the European Free Trade
Association fall under the jurisdiction of the Comité Européen de Normalization
Electrotechnique (CENELEC).
Radio Interference Compliance
Radio Interference (USA)
WARNING: This equipment has been tested and found to comply with the limits for Class A
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction's manual, may cause
interference to radio communications. Operation of this equipment in a residential area is
likely to cause interference in which case the user will be required to correct the interference
at his own expense.
The user is cautioned that changes and modifications made to the equipment without
approval of the manufacturer could void the user's authority to operate this equipment.
It is suggested that the user use only shielded and grounded cables to ensure compliance
with FCC Rules.