360 Systems MAXX-1000SD - Manual (Page 119)

MAXX Owner’s Manual Page 119
Appendix A
Connector Specifications
Audio XLR-3 Connector Pinout
Signals appearing on the XLR connectors are determined by the setting of the internal
Analog/Digital Audio Selection jumpers.
Pin BALANCED ANALOG AES/EBU DIGITAL
1 SHIELD ( FRAME GROUND ) SHIELD ( FRAME GROUND )
2 " + " OR HOT D IGITAL +
3 " – " OR COMMON D IGITAL -
S HELL F RAME GROUND F RAME GROUND
Serial Control Connector Pinout
Pin
EIA-422, DB9-F
Connector
1 GND
2 Transmit A (TX–)
3 Receive B (RX+)
4 GND
5 N/C
6 GND
7 Transmit B (TX+)
8 Receive A (RX-)
9 GND
Shell Frame ground