360 Systems MAXX-1000SD - Manual (Page 61)

MAXX Owner’s Manual Page 61
Loading a Playlist (FILE>LOAD)
Click FILE->LOAD from the Playlist View to bring up the list of available PlayLists. Double-click on
a playlist to load it.
Saving a new Playlist (FILE>SAVE AS)
Once a Playlist has been created, it can be saved by selecting FILE->SAVE AS from the Playlist View
pulldown menu. Type in an appropriate name and click SAVE.
Saving an existing Playlist (FILE>SAVE)
An existing Playlist can be saved by selecting FILE->SAVE from the Playlist View pulldown menu.
Type in an appropriate name and click SAVE.
Setting a Start Time for a Playlist)
Set a start time for a Playlist by entering a twenty four hour time of day in Hours, Minutes and
Seconds in the START TIME field (see Figure 19 ). Click on any field to edit the field. Check the ARM
START TIME checkbox to arm the start time. The ARM START TIME checkbox will automatically
uncheck itself once the playlist has started
Stopping a Playlist (STOP)
Click STOP to halt a Playlist.
Pausing a Playlist (PLAY/PAUSE)
When a Playlist is running, the PLAY key will change to indicate PAUSE. Pressing PAUSE stops the
Playlist immediately, on the current frame of a clip. Pressing it again will resume playback.
Cueing a Clip (CUE)
When the Playlist is running, click CUE to immediately prepare a selected clip for playback.
When the current clip is finished playing, the Playlist will play the Cued clip, followed by all
subsequent clips. This allows the user to skip over clips that appear in the list between the currently
playing clip and the selected clip.
The user may also re-cue a clip that has already been played. In this case, the Playlist will restart
from the selected clip, and all subsequent events will be played (or re-played) in sequence. When
the Playlist is stopped, CUE will prepare the selected clip to play when Play is pressed, or the list is
started automatically by Arm Start Time.
Looping a Playlist (LOOP [X] )
To loop the entire playlist after the last clip completes, check the LOOP checkbox at any time. Upon
un-checking, the list will play to completion and then stop.
Showing the First Frame of a CUED clip (SHOW)
When a clip is cued, the STOP button legend changes to SHOW. Pressing it will display the first
frame of the cued clip.