360 Systems MAXX-1000SD - Manual (Page 39)

MAXX Owner’s Manual Page 39
C. Enter a clip name using the keyboard. You may use up to 31 characters. Spaces may be
used; however, some characters other than upper or lower case letters and numbers may not
be used. These characters will not enter into the name field when typed. They include * ( ) +
= ; : ‘ “ < > , . / and ? A list of existing clips will appear in the large window, and can be
used as a name reference when creating new clip names.
Note: File naming is case sensitive. Upper case letters sort before lower case. The name FILE sorts
in the order shown, based on differing capitalization: FILE, File, fiLe, and file. When using the
Image Server with automation systems or other remote controls, it is not a good practice to
distinguish files only by differences in case.
D. The Channel 1 transport Window will display the words IDLE CUEING for two seconds or
less. When ready to record, the Channel 1 Transport Window will display IDLE READY.
Figure 8 - Channel 1 Ready to Record
E. You may now click the RECORD button at any time to begin recording. The yellow time
display counters will update the clip duration continually.
F. To stop recording, click STOP.
Note: An in-progress recording must be at least 10 seconds long before it will appear in the clip list.
Hitting the STOP button to end the recording after less than 10 seconds will also cause the clip to
appear in the clip list