Document Outline

• 1.PDF
  • 1 Introduction
    • 1.1 Cautionary Items for Safety
    • 1.2 Meanings of Warning, Caution, and Reference
    • 1.3 Spare Parts
    • 1.4 Usage of this Manual
    • 1.5 Cautions for Safety and Sanitation
    • 1.6 Standard Maintenance
  • 2 Cautionary Items at Operation
    • 2.1 Cautionary Items at Operation
    • 2.2 Cautionary Items at Handling Electrical Equipment and Electrical Wiring
      • 2.2.1 Wire
      • 2.2.2 Battery
      • 2.2.3 Coupler
      • 2.2.4 Washing
      • 2.2.5 Oil and Refuse
  • 3 Tetrahedral Sketch Drawing
  • 4 Dimension
  • 5 Name of Each Part
  • 6 Specification
  • 7 Outline
    • 7.1 Engine Model
    • 7.2 Engine Serial Number
    • 7.3 Chassis Serial Number
  • 8 Periodical Inspection and Maintenance List
  • 9 List of Refueling, Lubrication, and Water/Oil Supply
• 2.PDF
  • 1 Maintenance Standard
    • 1.1 List of Maintenance Standard
    • 1.2 List of Standard Torque
    • 1.3 List of Torque
    • 1.4 List of Sealing Compound
  • 2 Installation and Removal of Engine Parts
    • 2.1 Removal and Disassembly of Engine Assembly
    • 2.2 Assembly and Installation of Engine Assembly
    • 2.3 Inspection and Maintenance
  • 3 Clutch
    • 3.1 Transmission Power Train Schematic
    • 3.2 Structure and Specifications of Clutch
    • 3.3 Clutch Control
    • 3.4 Removal and Disassembly of Clutch
    • 3.5 Assembly and Installation of Clutch
    • 3.6 Inspection and Maintenance of Clutch
  • 4 HST
    • 4.1 HST Control
    • 4.2 Removal and Disassembly of HST
    • 4.3 Assembly and Installation of HST
    • 4.4 Inspection and Adjustment of HST
  • 5 Transmission
    • 5.1 Transmission Assembly Outline
      • 5.1.1 7532
      • 5.1.2 7530
    • 5.2 Transmission Control
      • 5.2.1 7532
      • 5.2.2 7530
    • 5.3 Removal and Disassembly of Transmission
      • 5.3.1 Disassembly of Transmission Case Assembly (7532)
      • 5.3.2 Disassembly of Transmission Case Assembly (Manual Transmission Specification)
    • 5.4 Removal and Disassembly of Rear PTO
    • 5.5 Assembly and Installation of Rear PTO
    • 5.6 Removal and Disassembly of MID PTO
    • 5.7 Assembly and Installation of MID PTO
    • 5.8 Assembly and Installation of Transmission
      • 5.8.1 Assembly of Transmission Case Assembly (HST Specification)
      • 5.8.2 Assembly of Transmission Case Assembly (7530)
    • 5.9 Inspection and Adjustment of Transmission
  • 6 Rear Axle and Brake
    • 6.1 Structure of Rear Axle and Brake
    • 6.2 Differential Lock Pedal
    • 6.3 Control for Rear Axle and Brake
    • 6.4 Removal and Disassembly of Rear Axle and Brake
    • 6.5 Assembly and Installation of Rear Axle and Brake
    • 6.6 Inspection and Adjustment of Rear Axle and Brake
      • 6.6.1 Brake Pedal
  • 7 Front Axle
    • 7.1 Structure and Specification of Front Axle
    • 7.2 Removal and Disassembly of Front Axle
      • 7.2.1 Removal of Front Axle Assembly
      • 7.2.2 Disassembly of Front Axle Assembly
    • 7.3 Assembly and Installation of Front Axle
      • 7.3.1 Assembly of Front Axle Assembly
      • 7.3.2 Installation of Front Axle Assembly
    • 7.4 Inspection and Adjustment of Front Axle
      • 7.4.1 Backlash
      • 7.4.2 Clearance of Bush
  • 8 Steering
    • 8.1 Structure of Steering
      • 8.1.1 Structure
      • 8.1.2 Steering Unit
      • 8.1.3 Specification
    • 8.2 Removal and Disassembly of Steering
      • 8.2.1 Removal of Steering
    • 8.3 Assembly and Installation of Steering
      • 8.3.1 Assembly of Steering Shaft
      • 8.3.2 Installation of Steering Unit Hose
      • 8.3.3 Assembly of Hydraulic Cylinder Assembly
      • 8.3.4 Bleeding Procedure for Power Steering
    • 8.4 Inspection and Maintenance of Steering
      • 8.4.1 Inspection and Maintenance of Toe In
      • 8.4.2 Free Play for Steering Wheel
  • 9 Troubleshooting
    • 9.1 Running Operation
    • 9.2 Power Steering
• 3.PDF
  • 1.4 Hydraulic Piping Diagram
  • 1.5 Hydraulic Components
    • 1.5.1 Pump
    • 1.5.2 Hydraulic Block
    • 1.5.3 IND. PTO Valve (7530 Only)
    • 1.5.4 Control Valve
    • 1.5.5 Position Control
  • 1.6 Removal and Disassembly of Hydraulic Circuit
  • 1.7 Assembly and Installation of Hydraulic Circuit
  • 1.8 Inspection and Adjustment of Hydraulic System
  • 2 Troubleshooting
• 4.PDF
  • 1 Wiring Diagram
    • 1.1 Circuit Diagram
    • 1.2 Arrangement Plan - 1/2
    • 1.3 Harness Drawing
  • 2 Inspection and Adjustment