Cisco 12000/10700 V3.1.1 - Manual (Page 322)

11-36
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 11 Layer 3 QoS
WRED Rx Configuration
WRED Rx Configuration
The WRED Rx Configuration section covers the following areas:
• Associating a ToFab Policy to a Line card
• Disassociating a ToFab Policy from a Line card
• Changing the Association of a ToFab Policy
• WRED Rx Configuration Window—Detailed Description
Associating a ToFab Policy to a Line card
To associate a ToFab policy to a line card, proceed as follows:
Step 1 Launch the Map Viewer, and choose the Layer3QoSView. Right click on the WRED-MDRR object and
choose Cisco 12000/10720 Manager>Configuration>ToFab>WRED Rx Configuration from a
relevant object icon to launch the WRED Rx Configuration window. Refer
Table 11-1 on page 11-2 for
information on which objects allow you to launch the WRED Rx Configuration window.
Figure 11-16 WRED Rx Configuration