Managing atm qos profiles, Creating atm qos profiles, Managing atm qos profiles” section on – Cisco 12000/10700 V3.1.1 User Manual

Page 336

Advertising
background image

12-12

Cisco 12000/10700 v3.1.1 Router Manager User Guide

OL-4455-01

Chapter 12 Managing ATM Connections

Managing ATM QoS Profiles

Upload Status—Upload status messages for the first selected chassis.

Upload—Choose one or more chassis and choose Upload to initiate the upload of the ATM connections
and QoS profiles from all the selected chassis.

Managing ATM QoS Profiles

The ATM QoS Profile Configuration window allows you to create and save ATM QoS profiles. ATM
QoS profiles are stored in Cisco 12000/10720 Router Manager and the associated fields are created on
the device when the connection (PVC or SVC) is created.

Note

ATM QoS profiles can only be edited when they are not applied, that is, if any connections are using the
profile, you cannot edit the profile. You can view which specific connections are using a certain profile
by running a Cisco EMF query against the profile name (see Cisco Element Management Framework
User Guide
for further details).

This section covers the following areas:

Creating ATM QoS Profiles

Editing an ATM QoS Profile

Deleting an ATM QoS Profile

ATM QoS Profiles Configuration Window—Detailed Description

Creating ATM QoS Profiles

To create ATM QoS profiles, proceed as follows:

Step 1

Right-click on an interface, then choose Cisco 12000/10720 Manager>Configuration>
Interface>QoS> ATM QoS Profile Configuration
. See

Table 12-6 on page 12-18

for information on

the objects that allow you to launch the ATM QoS Profiles window.

Advertising