Cisco 12000/10700 V3.1.1 - Manual (Page 504)

16-2
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 16 MPLS VRF Management
VRF Management Workflows
VRF Management Workflows
This chapter describes the following workflows:
• Creating VRF Objects in the EM, page 16-3
– Deploying VRF Objects, page 16-3
• Creating and Configuring the VRF Policy on a Device, page 16-8
– Configuring and Creating a VRF Policy on a Selected Chassis, page 16-8
– Removing a VRF Policy from a Selected Chassis, page 16-10
– Adding a Routing Target to a Selected Chassis, page 16-10
– Deleting a Routing Target from a Selected Chassis, page 16-10
• Associating a VRF Policy with an Interface, page 16-12
– Associating VRF Policies, page 16-13
– Removing a VRF Policy from a Selected Interface, page 16-14
• VRF Fault Management, page 16-15
– VRF Status, page 16-15
– Interface VRF Status, page 16-19
– VPN Status, page 16-20
– VRF Object Status, page 16-26
Launching the MPLS VRF Management Windows
Table 16-1 displays the Cisco 12000/10720 Router Manager MPLS VRF Management windows that can
be launched from each object type. For example, the VRF Configuration window can be launched from
a Site, or Chassis object, but cannot be launched from a Module or an Interface object.
Note Table 16-1 lists the menu options to launch the MPLS VRF Management dialogs from the site level.
Table 16-1 Launching the MPLS VRF Management Windows
Cisco 12000/10720
Router Manager
Window/Task Objects (that can be selected) to Open the Window Menu Options to Select to Open
Window
Site Chassis
12000
Series
Chassis
10720
Module Interface Software
Folder VRF
Folder VRF
Deploying a VRF
Object Yes Yes Yes No No Yes Yes No Deployment> Cisco
12000/10720 Manager> 12xxx
or 10720> VRF
VRF
Configuration
Window Yes Yes Yes No No Yes Yes Yes Cisco 12000/10720 Manager>
Configuration> Chassis>
MPLS> VRF Configuration