A&D Weighing HR-202i - Manual (Page 31)

29
Class Item and Parameter Description
0 600 bps
1 1200 bps
2 2400 bps
3 4800 bps
4 9600 bps
bp5
Baud rate
5 19200 bps
0 7 bits, even
1 7 bits, odd
btpr
Data bit, parity bit
2 8 bits, none
0 CR LF Crlf
Terminator
1 CR
CR: ASCII code 0Dh
LF: ASCII code 0Ah
0 A&D standard format
1 DP format
2 KF format
3 MT format
4 NU format
type
Data format
5 CSV format
Refer to "10.5. Description of Item
"Data Format".
0 No limit t-Up
Timeout
1 1 second
Selects the wait time to receive a
command.
0 No output erCd
AK, Error code
1 Output
AK: ASCII code 06h
0 Not used
5if
Serial
interface
Ct5
CTS, RTS control
1 Used
Controls CTS and RTS.
Unit
Unit
Refer to "5. Weighing Units".
id
ID number setting
Refer to "11. ID Number And GLP Report".
: Factory settings. Digit is a unit of minimum weighing value.
Caution
The balance may not transmit the data completely at the specified refresh rate, depending
on the baud rate or data added to the weighing data such as ID number. .