A&D Weighing FG-150KBM - Manual (Page 13)

11
7. COMPARATOR
The results of the comparison are indicated by HI, OK or LO on the display.
The formula to compare is as follows:
LO < Lower limit value = OK = Upper limit value < HI
Operating conditions (see the “Function list F6”):
F6-0: No comparison (comparator function disabled).
F6-1: To compare all data.
F6-2: To compare more than +4d or less than -4d.
F6-3: To compare all stable data.
F6-4: To compare stable data more than +4d or less than -4d.
F6-5: To compare stable data more than +4d.
d = minimum weight display (see “12-1 Specifications”)
In case of counting mode, “d” is equal to minimum weight display of kg mode.
? The upper limit and lower limit numerical values are common to each of the
weighing and counting mode.
? Ignore the decimal point of setting value to apply it to each mode.
Example of FG30K / setting value is “001000”.
Display mode Limit value Display capacity
NORMAL resolution kg 10.00 kg 30.00 kg x 0.01 kg
HIGH resolution kg 1.000 kg 30.000 kg x 0.005 kg
HIGHER resolution kg 1.000 kg 30.000 kg x 0.002 kg
NORMAL resolution lb 10.00 lb 60.00 kg x 0.02 lb
HIGH resolution lb 10.00 lb 60.00 kg x 0.01 lb
HIGHER resolution lb 1.000 lb 60.000 kg x 0.005 lb
Counting mode 1000 pcs
Entering the upper and lower limit values
1. Press the MODE switch to select weighing
unit ”kg”, ”lb” or ”oz”
2. Press and hold the MODE switch to enter the
upper limit setting mode.
3. Enter an upper limit value using the following switches.
RE-ZERO or ZERO To select the digit blinking to change.
PRINT Increment the value of the selected digit.
The minus sign can be set at the next digit of the least
significant digit. The PRINT switch alternates the
minus sign on and off. The blinking “-” shows minus
and no sign is plus.
4. After setting all of digits, press the MODE switch. Then, the upper limit is stored
and the display goes to the lower setting mode.
5. Set the lower limit in a similar way, and press the MODE switch to return to
weighing mode.
? The upper and lower limits are maintained even if the scale is powered off.
0.00
0000.00
HI
-0000.00
HI