Auxiliary input jack, Audio system theft protection, P142) – Acura 2014 TSX - Owner's Manual User Manual

Page 143

Advertising
background image

142

uu

Audio System

u

Auxiliary Input Jack

Auxiliary Input Jack

Use the jack in the console compartment to connect standard audio devices.

1. Open the AUX cover.

2. Connect a standard audio device to the

input jack using a 1/8 inch (3.5 mm)

stereo miniplug.

u

The audio system automatically switches
to the AUX mode.

Audio System Theft Protection

The audio system is disabled when it is disconnected from the power source, such as
when the battery is disconnected or goes dead.

Entering the audio security code

ENTER CODE appears on the display when the power is reconnected.

1. Turn on the audio system.

2. Enter the audio security code using the preset buttons. If you enter an incorrect

digit, continue to the last digit, then try again. If you do not enter the code
correctly after 10 tries, you need to visit a dealer to have the system reset.

1

Auxiliary Input Jack

To switch the mode, press any of the audio mode
buttons. You can return to the AUX mode by
pressing the AUX button.

You cannot use the auxiliary input jack if you replace
the audio system.

State or local laws may prohibit the operation of
handheld electronic devices while operating a
vehicle.

1

Audio System Theft Protection

Find the audio system’s security code and serial
number on the radio code card.

Do not store the card in your vehicle. If you lose the
radio code card, you must obtain the information
from a dealer.

You can register the security code at Acura Owners
(owners.acura.com.), and find information on how to
retrieve the serial number and obtain the code at
radio-navicode.acura.com.

14 ACURA TSX 4D-31TL16500.book 142 ページ 2013年6月17日 月曜日 午前9時40分

QRG

Index

2014 TSX

Features

TOC

Advertising