Fog light bulbs, P253) – Acura 2014 TSX - Owner's Manual User Manual

Page 254

Advertising
background image

Continued

253

uu

Replacing Light Bulbs

u

Fog Light Bulbs

4. Unhook the hook, and pull out

the connector.

5. Remove the old bulb and insert the

new bulb.

6. Put the connector back into the

headlight assembly.

Fog Light Bulbs

When replacing, use the following bulbs.

1. Remove the clips using a flat-tip

screwdriver, and lower the under cover.

1

Low Beam Headlights

Insert the clip with the center pin raised, and push
until it is flat.

Push until the
pin is flat

Hook

Bulb

Connector

Fog Light: 55 W

1

Fog Light Bulbs

NOTICE

Halogen bulbs get very hot when lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.

The fog lights are halogen bulbs.

When replacing a bulb, handle it by its plastic case,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.

Clip

Under Cover

14 ACURA TSX 4D-31TL16500.book 253 ページ 2013年6月17日 月曜日 午前9時40分

QRG

Index

2014 TSX

Main

tenan

ce

TOC

Advertising