Acura 2014 TSX - Owner's Manual - Manual (Page 303)

302
uu Fuses u Inspecting and Changing Fuses



Inspecting and Changing Fuses
1. Turn the ignition switch to LOCK ( 0 . Turn
headlights and all accessories off.
2. Remove the fuse box cover.
3. Check the large fuse in the
engine compartment.
u If the fuse is blown, use a Phillips-head
screwdriver to remove the screw and
replace it with a new one.
4. Inspect the small fuses in the engine
compartment and the vehicle interior.
u If there is a burned out fuse, remove it
with the fuse puller and replace it with a
new one.
1 Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system. If you do not have a replacement
fuse with the proper rating for the circuit, install one
with a lower rating.
Replace fuse with a spare fuse of the same specified
amperage.
Confirm the specified amperage using the charts on
P. 300 and P. 301 .
There is a fuse puller on the back of the engine
compartment fuse box.
Fuse
Blown Fuse
Combined Fuse
Blown Fuse
Fuse Puller
14 ACURA TSX 4D-31TL16500.book 302 ページ ２０１３年６月１７日 月曜日 午前９時４０分
QRG
Index
2014 TSX
Han
d
lin
g the U
n
expected
TOC