Acura 2014 TSX - Owner's Manual User Manual

Page 70

Advertising
background image

69

uu

Indicators

u

Continued

Indicator

Name

On/Blinking

Explanation

Message

System Message
Indicator

Comes on along with a beep when
a problem is detected. A system
message on the multi-information
display appears at the same time.

While the indicator is on, press the

(information) button to see the

message again.

Refer to the Indicator information in this
chapter when a system message appears
on the multi-information display. Take
the appropriate action for the message.

The multi-information display does not
return to the normal screen unless the
warning is canceled, or the

button is pressed.

Turn Signal
Indicators

The turn signal indicators blink
when you operate the turn signal
lever.

If you press the hazard warning
button, both indicators and all turn
signals blink at the same time.

Does not blink or blinks rapidly - A
turn signal light bulb has blown. Change
the bulb immediately.

2 Replacing Light Bulbs

P. 254

High Beam
Indicator

Comes on when the high beam
headlights are on.

Comes on with reduced brightness
when Daytime Running Lights
(DRL) are on.

Lights On
Indicator

Comes on whenever the light
switch is on, or in AUTO when the
exterior lights are on.

If you remove the key from the ignition
switch while the lights are on, a chime
sounds when the driver’s door is opened.

14 ACURA TSX 4D-31TL16500.book 69 ページ 2013年6月17日 月曜日 午前9時40分

P. 255

QRG

Index

2014 TSX

In

strum

e

nt Pa

nel

TOC

Advertising