Acura 2014 TSX - Owner's Manual - Manual (Page 291)

290
uu Jump Starting u



Once your vehicle’s engine has started, remove the jumper cables in the
following order.
1. Disconnect the jumper cable from your vehicle’s ground.
2. Disconnect the other end of the jumper cable from the booster
3. Disconnect the jumper cable from your vehicle’s battery + terminal.
4. Disconnect the other end of the jumper cable from the booster
battery + terminal.
Have your vehicle inspected by a nearby service station or a dealer.
6-cylinder models
■ What to Do After the Engine Starts
14 ACURA TSX 4D-31TL16500.book 290 ページ ２０１３年６月１７日 月曜日 午前９時４０分
QRG
Index
2014 TSX
Han
d
lin
g the U
n
expected
TOC
battery + terminal.