Acura 2014 TSX - Owner's Manual - Manual (Page 182)

181
Compass *
When you turn the ignition switch to ON ( w , the compass self-calibrates, and the
compass display appears.
Compass Calibration
If the compass indicates the wrong direction, or the CAL indicator blinks, you need
to manually calibrate the system.
1. Turn the ignition switch to ON ( w .
2. Press and hold the MENU button until the
display shows the compass setting
menu list.
3. Rotate to select CALIBRATION, then
press .
4. When the display changes to PUSH CAL
START, press .
5. Drive the vehicle slowly in two circles.
u The compass starts to show a direction
after the calibration. The CAL indicator
goes off.
1 Compass *
Compass operation can be affected under the
following conditions:
• Driving near power lines or stations
• Crossing a bridge
• Passing a large vehicle, or driving near a large
object that can cause a magnetic disturbance
• When accessories such as antennas and roof racks
are mounted by magnets
1 Compass Calibration
Calibrate the compass in an open area.
While setting the compass:
• The RETURN button returns to the previous screen.
• The MENU button cancels the setting mode.
Compass Setting Menu Items
* Not available on all models
14 ACURA TSX 4D-31TL16500.book 181 ページ ２０１３年６月１７日 月曜日 午前９時４０分
QRG
Index
2014 TSX
Features
TOC