Active blind spot detection, Tion – BMW 2012 5 Series User Manual

Page 104

Advertising
background image

Camera

The camera is located near the base of the mir‐
ror.
Keep windshield clean and clear in the area in
front of the interior rear view mirror.

Active Blind Spot Detection

The concept

Two radar sensors below the rear bumper mon‐
itor the area behind and next to the vehicle at
speeds above approx. 30 mph/50 km/h.
The system indicates whether there are vehicles
in the blind spot, arrow 1, or approaching from
behind on the adjacent lane, arrow 2.
The lamp in the exterior mirror housing lights up
dimly.

Before you change lanes after setting the turn
signal, the system issues a warning in the situa‐
tions described above.
The lamp in the housing of the exterior mirror
flashes and the steering wheel vibrates.

Switching on/off

Press the button.

On: the LED lights up.

Off: the LED goes out.

The system can issue warnings at speeds above
approx. 30 mph/50 km/h.
The state is stored for the remote control cur‐
rently in use.

Display

Information stage

The dimmed lamp in the mirror housing indi‐
cates when there are vehicles in the blind spot
or approaching from behind.

Warning

If the turn signal is set while a vehicle is in the
critical zone, the steering wheel vibrates briefly
and the lamp in the mirror housing flashes
brightly.
The warning stops when the turn signal is
switched off, or the other vehicle leaves the crit‐
ical zone.

Seite 104

Controls

Safety

104

Online Edition for Part no. 01 40 2 607 879 - 09 11 490

Advertising