Interior equipment, Vehicle equipment, Integrated universal remote control – BMW 2012 5 Series User Manual

Page 146

Advertising
background image

Interior equipment

Vehicle equipment

All standard, country-specific and optional
equipment that is offered in the model series is
described in this chapter. Therefore, equipment
is also described that is not available in a vehicle,
e. g., because of the selected optional equip‐
ment or country variant. This also applies for
safety-related functions and systems.

Integrated universal remote

control

The concept

This system can replace up to three different
hand-held transmitters for various types of re‐
mote-controlled equipment, such as garage
doors or lighting systems.
The hand-held transmitter signal can be pro‐
grammed on one of the three memory buttons.
The corresponding device can then be operated
using the programmed memory button.
The LED indicates that a signal is being trans‐
mitted.
When selling the vehicle, delete the stored pro‐
grams for security reasons.

During programming
During programming and before activat‐

ing a device using the integrated universal re‐
mote control, ensure that there are no people,
animals, or objects in the range of movement of
the remote-controlled device; otherwise, there
is a risk of injury or damage.
Also follow the safety instructions of the hand-
held transmitter.◀

Compatibility

If this symbol is printed on the packaging
or in the instructions of the hand-held

transmitter, the remote-controlled device is
generally compatible with the integrated univer‐
sal remote control.
If you have any questions, please contact:

Your service center.

www.homelink.com on the Internet.

HomeLink is a registered trademark of Johnson
Controls, Inc.

Programming

LED, arrow 1.

Memory buttons, arrow 2.

Fixed-code hand-held transmitters

1.

Switch on the ignition.

2.

Initial setup:
Press the two outer memory buttons 1 and
3 for approx. 20 seconds until the LED, ar‐
row 1 flashes.
All programs of the three memory buttons,
arrow 2, are cleared.

3.

Hold the hand-held transmitter a distance of
approx. 1 to 3 in/2.5 to 8 cm from the mem‐
ory buttons.
The required distance depends on the
manual transmitter.

4.

Simultaneously press the transmit button of
the hand-held transmitter and the memory
button of the integrated universal remote
control.

Seite 146

Controls

Interior equipment

146

Online Edition for Part no. 01 40 2 607 879 - 09 11 490

Advertising