Personal profile – BMW 2012 5 Series User Manual

Page 31

Advertising
background image

4.

Insert a battery of the same type with the
positive side facing upwards.

5.

Press the cover closed.

Take the used battery to a recycling cen‐
ter or to your service center.

New remote controls

You can obtain new remote controls from your
service center.

Loss of the remote controls

Lost remote controls can be blocked by your
service center.

Emergency detection of remote control

It is possible to switch on the ignition or start the
engine in situations such as the following:

Interference of radio transmission to remote
control by external sources.

Discharged battery in the remote control.

A Check Control message is displayed if an at‐
tempt is made to switch on the ignition or start
the engine.

Starting the engine in case of

emergency detection of remote control

Automatic transmission: if a corresponding
Check Control message appears, hold the re‐
mote control, as shown, against the marked area
on the steering column and press the Start/Stop
button within 10 seconds while pressing the
brake.
Manual transmission: if a corresponding Check
Control message appears, hold the remote con‐

trol, as shown, against the marked area on the
steering column and press the Start/Stop button
within 10 seconds while pressing the clutch.

Personal Profile

The concept

Personal Profile concept

You can set several of your vehicle's functions
to suit your personal needs and preferences.

The settings are automatically saved in the
profile currently activated.

When the vehicle is unlocked, the profile that
was last detected and called up with the re‐
mote control is used.

Your personal settings will be recognized
and called up again even if the vehicle has
been used in the meantime by someone else
with another remote control.

The individual settings are stored for three Per‐
sonal Profiles and one guest profile.

Transmitting the settings

Your personal settings can be taken with you to
another vehicle equipped with the Personal Pro‐
file function. For more information, contact your
service center.
Transmission takes place via:

The USB interface, refer to page

153

, in the

glove compartment onto a USB device.

Profile management

Opening the profiles

A different profile can be called up than the one
associated with the remote control currently in
use.

1.

"Settings"

Seite 31

Opening and closing

Controls

31

Online Edition for Part no. 01 40 2 607 879 - 09 11 490

Advertising