Daytime running lights – BMW 2012 5 Series User Manual

Page 90

Advertising
background image

3.

"Welcome light"

The setting is stored for the remote control cur‐
rently in use.

Headlamp courtesy delay feature

The low beams stay lit for a short while after the
ignition is switched off, if the lamps are switched
off and the headlamp flasher is switched on.

Setting the duration

1.

"Settings"

2.

"Lighting"

3.

"Pathway light.: s"

4.

Set the duration.

The setting is stored for the remote control cur‐
rently in use.

Automatic headlamp control

Switch position : the low beams are switched
on and off automatically, e.g., in tunnels, in twi‐
light or if there is precipitation. The indicator
lamp in the instrument cluster lights up.
A blue sky with the sun low on the horizon can
cause the lights to be switched on.

The low beams always stay on when the fog
lamps are switched on.

Personal responsibility
The automatic headlamp control cannot

serve as a substitute for your personal judgment
in determining when the lamps should be
switched on in response to ambient lighting
conditions.
For example, the sensors are unable to detect
fog or hazy weather. To avoid safety risks, you
should always switch on the lamps manually un‐
der these conditions.◀

Daytime running lights

With the ignition switched on, the daytime run‐
ning lights light up in position 0,

or .

After the ignition is switched off, the parking
lamps light up in position

.

Activating/deactivating

1.

"Settings"

2.

"Lighting"

3.

"Daytime running lamps"

The setting is stored for the remote control cur‐
rently in use.

Seite 90

Controls

Lamps

90

Online Edition for Part no. 01 40 2 607 879 - 09 11 490

Advertising