Canon imageRUNNER C3100 N - Manual (Page 52)

Settings Menu 2-22
2
Pr
inter Settings Men
u
Personality
Auto * , PS, and PCL
This setting enables the machine to process data received from the host computer
in the specified data format. Setting the Personality to 'Auto' makes the machine
determine the type of data received from the host on a job-by-job basis. If you are
printing from applications on a computer, we recommend that you use the 'Auto'
setting.
NOTE
• If you find that the machine does not correctly switch to the appropriate personality
when Personality is set to 'Auto', change the setting manually to match the data you
are sending from the host computer.
• This function is not available when printing in UFR mode.
Mode Priority
None * , PS, and PCL
This setting determines which printer command language should be used if a job
is received without a specified command language. Mode Priority is used when
the Personality setting is set to 'Auto'.
None
This does not specify a preferred personality. If a job is received without a
specified command language, the current personality is used. The default setting
is 'None'.
PS
This assigns priority to the PS personality.
PCL
This assigns priority to the PCL personality.
NOTE
This function is not available when printing in UFR mode.