Canon imageRUNNER C3100 N - Manual (Page 61)

PCL/PS Settings 2-31
2
Pr
inter Settings Men
u
■ Gray Compensation
Text: On * , Off
Graphics: On * , Off
This setting determines whether only black (K) toner is used when the ratio of R
(red) to G (green) to B (blue) is the same.
Gray compensation can be set for Text and Graphics data.
If [On] is selected, black and gray data for the equivalent levels of RGB is printed
using the black (K) toner only, thereby lessening toner bleeding.
If [Off] is selected, black and gray data for the equivalent levels of RGB is printed
using all 4 (CMYK) toners. However, there is a possibility that the toner may bleed.
NOTE
If a problem occurs to the Graphics data with the default values set, switch
Graphics On and Off to fix the problem.
Gray Compensation 'Off'
RGB (R = G = B)
Gray Compensation 'On'
Test
Test Test Test Test Test