Canon imageRUNNER C3100 N - Manual (Page 59)

PCL/PS Settings 2-29
2
Pr
inter Settings Men
u
■ Unit of Measure
Millimeters, Inches *
This setting enables you to specify the unit of measurement you would like to use
to specify your custom paper size.
NOTE
This function is not available if the Custom Paper option is set to 'Off'.
■ X Dimension
5.51 to 17.99 inches; 17.99 * inches
This setting enables you to specify the X dimension of the custom paper. The X
dimension can be adjusted between 5.51" (140 mm) and 17.99" (457 mm) in
increments of 0.01" (1 mm).
This function can be very useful when part of the printed image is cut off.
Increasing this dimension may allow some of the missing text to be correctly
printed. Make sure you do not increase the X dimension beyond the actual size of
the paper you are using for printing.
NOTE
This function is not available if the Custom Paper option is set to 'Off'.
■ Y Dimension
3.90 to 12.13 inches; 12.13 * inches
This setting enables you to specify the Y dimension of the custom paper. The Y
dimension can be adjusted between 3.90" (99 mm) and 12.13" (308 mm) in
increments of 0.01" (1 mm).
This function can be very useful when part of the printed image is cut off.
Increasing this dimension may allow some of the missing text to be correctly
printed. Make sure you do not increase the Y dimension beyond the actual size of
the paper you are using for printing.
NOTE
This function is not available if the Custom Paper option is set to 'Off'.