Canon imageRUNNER C3100 N - Manual (Page 91)

If Trouble Occurs When Downloading Fonts, Macros, or Profiles from a Personal
Computer
4-15
4
T
roub
leshooting
If Trouble Occurs When Downloading Fonts, Macros,
or Profiles from a Personal Computer
If trouble occurs when fonts, macros, or profiles are downloaded from a personal
computer to this machine and the problem cannot be resolved by reinstalling, follow
the steps explained in this section to initialize the hard disk partition.
IMPORTANT
• Only the system administrator for the machine can initialize the hard disk. Contact the
system administrator to execute this procedure.
• The font, macros, or profile information downloaded to the hard disk is deleted by
initializing the hard disk.
• Do not turn OFF the power when the hard disk is initializing. This may damage the
machine.
NOTE
• The hard disk cannot be initialized in the following conditions:
- When print data is being received or printed. (It is recommended that you remove the
cable connecting the machine to the hub, so it does not receive print data.)
- When fonts are being installed or uninstalled.
• The steps explained below are for initializing the PCL Hard Disk partition.
• To initialize the PS Hard Disk partition, follow the same steps, except that for step 5,
select [Initialize PS Hard Disk].
1
Set System Management Mode.
NOTE
Before setting System Management Mode, a system manager ID and system
password must be set. For details on settings, see Chapter 6, "System Manager
Settings," in the Reference Guide.